DUMP TRAILER Power UNIT-DOUBLE ACTING
This power unit has a power up electrical power down circuit with load holding on the two A & B ports. A strain compensatred movement management is often added to circuit to control the decent speed of the cylinder.
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all the hydraulic elements concerned before installation of the energy unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which ought to also be clean and free of impurities. N46 hydraulic oil is encouraged.
4. The electrical power unit really should be mounted horizontally.
5. Check the oil degree within the tank just after the initial operating of the power unit.
6. Oil modifying is required just after the preliminary a hundred operation hrs, afterwards when every single 3000 hours.
DUMP TRAILER Energy UNIT- SINGLE ACTING
This energy unit includes a power up gravity down circuit. Start the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve may be offered if expected. Also a strain compen sated movement manage might be additional for the circuit to regulate the descent speed of the cylinder.
Remark: Please seek the advice of our income engineer for the different pump displacement, motor energy or tank capability.
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean every one of the hydraulic elements concerned just before set up of the energy unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which need to also be clean and totally free of impurities.N46 hydraulic oil is advisable.
4. The power unit must be mounted horizontally.
five. Check the oil degree while in the tank just after the first working from the electrical power unit.
6. Oil modifying is required immediately after the preliminary a hundred operation hrs, afterwards after just about every 3000 hrs.